There are three types of charging stations for electric vehicles (EVs): Level 1, Level 2 and Direct Current (DC).
Good for: Plug-in hybrid, such as the Kia Niro
Miles/charge time: 5 miles per hour of charge
Good for: Battery EVs, such as the Tesla Model 3
Miles/charge time: 13 to 25 miles per hour of charge
Good for: Most battery EVs. Check your manufacturer details.
Miles/charge time: 10 to 30 minutes for a full charge
Every new EV is sold with a Level 1 charging station. It can be plugged into a standard household 110-volt grounded wall outlet and usually requires no upgrade to your utility panel. A Level 1 charging station will deliver about 5 miles per hour of charge.
This ready-to-go option might be right if you have a short commute, drive a plug-in hybrid such as the Kia Niro Plug-in Hybrid, are offered workplace charging, or if you’re able to charge your vehicle for 8 or more hours each night.
Level 2 charging stations are four times faster than Level 1 and can provide about 25 miles per hour of charge. Level 2 stations require a professionally installed 240-volt outlet on a dedicated circuit. If you’d like one installed in your home, contact a licensed electrician to get an estimate and to determine if a permit is required.
Level 2 might be the right choice if you drive a battery EV such as a Tesla 3 Model, as these cars have larger batteries that require longer charging times. Drivers with longer commutes or who want a faster charge or a longer electric driving range should also consider choosing a Level 2 charging station.
If your vehicle supports them, look for publicly available DC fast chargers when you’re on the road. These high-power stations can charge a battery to 80 percent of capacity in 30 minutes or less. Check with your manufacturer for more information on DC fast charging for your EV.
On average, the cost of a Level 2 charging station ranges from $500 - $700. A charger may cost more or less depending on key features such as portability, amperage, and WiFi capability.
To determine how much power will flow to your car, multiply the Volts by the Amps and divide by 1,000 (Amps x Volts/1,000). For example, a 240-V Level 2 charging station with a 30-amp rating will supply 7.2 kWs (30 x 240 /1,000). After one hour of charging, your EV will add 7.2kW X 1 hr = 7.2 kWh of energy to your vehicle.
To calculate how long it will take to charge the entire capacity of the battery, refer to the manufacturer documents to determine the battery capacity of your EV.
Example based on an all-electric model:
On average, Americans drive 30 miles per day. If you want more than 50 miles of range from overnight charging, you will need a station with at least 16 amps. Level 2 residential chargers range from 16 to 80 amps.
Charging times, range and size of battery vary by vehicle.
The chart above assumes:
Use PG&E Marketplace to search and compare Level 2 residential charging stations from a range of retailers. You can also read customer reviews and purchase chargers directly from the retailers.
Decide if you want a hard-wired and permanently-mounted charger, or a portable unit that simply plugs into a 240-volt outlet and will hang on the wall. Portable chargers allow you to take the charger with you if you move.
Determine where your charger will be located. Note that the further the charger is from your home’s utility panel, the more costly the installation. Measure the distance from where your car will be parked to your charger location to determine the required cable length. Cables range from 12 to 25 feet.
Smart chargers connect to your WiFi and allow you to program charging from your phone and monitor your charging habits. However, most EV drivers now have the ability to control charging through their car's own app.
The average cost for installing a Level 2 charging station ranges from $400 to $1,200 excluding charger cost. PLEASE NOTE: Installation costs will vary depending on electrical upgrades, cable length, and other features identified below.
Talk with a qualified electrician to assess whether your electrical panel has capacity for a Level 2 charger.
Be sure to discuss the following when consulting with an electrician.
Select the PG&E electric rate that is best for your charging needs. You can enroll in any residential rate. The EV2-A rate is often best for EV owners because electricity costs less when you charge at certain times of day or overnight. The EV-B rate may be useful for people who want to have one electric rate for their whole house and a separate EV rate for their electric car charging.
Find out which rate is the best fit for you here: EV Savings Calculator.
PLEASE NOTE: A PG&E representative may schedule a visit to determine whether your current electric service can support an EV. You may have to upgrade your service or your panel, or add a second electric panel. Service upgrades are necessary when the service wire to your home doesn't meet your capacity needs. PG&E charges a $100 service fee for a second meter. You’re responsible for the installation costs to support an additional meter. The costs are generally around $2,000, but can be as high as $8,000 or more.
After you determine which EV charging system is right for you, contact PG&E. You must complete an application to notify us of the change of service including the following information:
Use the free online services listed below to find local EV charging station installers in your area. In addition to providing quotes from local installers, the sites also include customer reviews and helpful installation information. To obtain quotes, you may be asked to provide your installation timeline, property type (house or apartment), ownership rights, EV charger type and installation location, and confirm your dedicated voltage.
*Enter your ZIP Code on the site to determine if your area is served.
California law requires property owners to allow tenants to install a residential charging station. Tenants cannot be denied a request to install a residential charging station if the tenant pays for the installation, maintenance, insurance and removal of the charging station. However, there are certain residential rental conditions where this law does not apply. For example, if there are already EV charging stations for 10 percent or more of the designated parking spaces for renters, the law does not apply. Review additional California legislative 详细.
Help your property owner understand options by educating yourself
Share property benefits of having EV chargers on site
Obtain permission to install an EV charging station
Once you’ve received approval to install a charging station, review our installation checklist for step-by-step information on how to install your EV level 2 charger.
Learn more about EV charging and find answers to other frequently asked questions.
If EV2-A is the rate plan for you, why wait? Sign in to your online account to change your rate plan.
As an EV owner and PG&E customer, you may be eligible to receive the Clean Fuel Rebate for your use of electricity as a clean transportation fuel.
Use the following tools to learn more about EVs, their incentives and where to charge them: